Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 59)

Chapter 5
Creating a Sample Application
5–43
You will now enter the Background Monitor to assign the alarm screen to a
bit that monitors alarm conditions. When this bit is set (turns ON), Alarm
Screen 60 will appear.
1. Press [Esc] to return to the Edit File menu.
2. Highlight Background Monitor and press [Return].
The Background Builder screen appears.
3. Press [Return] to select Background Register 1.
The following screen appears.
4. Press [Return] to select Bit.
You are prompted to enter Monitor Bit Register data.
5. Enter the following data in the Monitor Bit Register window.
Enter 1 Here
After entering 60 and pressing [Return], the Alarm Screen
appears in the display window.
Edit Background Monitor