Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 41)

Chapter 5
Creating a Sample Application
5–25
5. Use the [
"#][{] arrow keys to move the cursor to row 2, column 8 of
the display window.
6. Press [F1] (Display Register).
The screen displays a list of register types.
7. Highlight 16 Bit Signed Integer and press [Return].
The 16 Bit Signed Integer Display appears.
8. Use the arrow [
"#] and [Return] keys to enter the following register data.
Arrows
indicate
changes
9. Press [Esc] after entering the register data.
The data display window shows 3 asterisks (***) in row 2 indicating the
data display register position.
☞ Steps 5 – 9 define the data
display register for line 2 of
Screen 21.