Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 42)

Chapter 5
Creating a Sample Application
5–26
10. Use the [
"#][{] arrow keys to move the cursor to row 4, column 9 of
the display window.
11. Press [F2] (Entry Register).
The screen displays a list of data entry register types.
12. Highlight 16 Bit Signed Integer and press [Return].
The 16 Bit Signed Integer Display appears.
13. Use the arrow [
"#] and [Return] keys to enter the following register data.
Arrows
indicate
changes
Change
Automatically
14. Press [Esc] after entering the register data.
The data display window shows 3 diamonds
(
zzz) in row 4 indicating
the data entry register position.
Continue to the next section to create Data Entry Screen 40.
☞ Steps 10 – 14 define the data
entry register for line 4 of
Screen 21.