Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 29)

Chapter 5
Creating a Sample Application
5–13
10. Use the [
#] arrow keys to move the cursor to row 3, column 1
(4 spaces to the left of % Full).
11. Press [F1] (Display Register).
The screen displays a list of register types.
12. Use the [
↓↑
] keys to highlight 16 Bit Signed Integer and press [Return].
The 16 Bit Signed Integer Display appears.
13. Use the arrow [
"#] and [Return] keys to enter the register data below.
Arrows
indicate
changes
14. After pressing [Return] to enter the last line of register data, press [Esc] to
accept the data.
The data display window shows 3 asterisks (***) before % Full
indicating the data register position.
Continue to the next section to create Data Display 23.
☞ Steps 10 – 14 define the data
register for % Full.