Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 61)

A–B
6
Chapter
6–1
Downloading the Application
This chapter describes how to download the sample application from your
computer to the DTAM Plus. It tells how to:
D Set DTAM Plus DIP switches
D Connect power and communication cables
D Download the application
Before you can download an application, you must set the DTAM Plus DIP
switches as shown in Figure 6.1.
To access DIP switches, remove the plug from the access hole on the back of
the DTAM Plus.
Figure 6.1
DIP Switch Settings for Download
1 2 3 4 5 6
OPEN
ON =
Side View
SW-1
ON
OFF OFF
ON
1 2 3 4 5 6
OFF
ON
Chapter Objectives
Download
DIP Switch Settings