Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 36)

Chapter 5
Creating a Sample Application
5–20
Data Display (Screen 29)
1. Press the [F8] function key to start a new screen.
The screen prompts you for a new screen number.
2. Type 29 and press [Return].
The screen clears the previous screen and displays a list of screen types.
3. Highlight Data Display Screen and press [Return].
4. Enter the following data in the display window:
Type NEW:T4:30.PRE and press [Return]
Enter 4 spaces, type T4:31.PRE, press [Return]
Enter 4 spaces, type T4:32.PRE, press [Return]
Type Press Next and press [Return]
The screen should look like this.
Note: You will now enter 3 data registers for this screen.