Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 25)

Chapter 5
Creating a Sample Application
5–9
This section shows how to create the following application screens:
D Main Menu (Screen 1)
D Sub-Menu (Screen 20)
D Data Display (Screens 22, 23, 27, 29)
D Data Entry (Screens 21, 40)
D Security (Screen 39)
D Bar Graph (Screen 11)
D Recipe (Screen 28)
Main Menu (Screen 1)
1. Highlight Screen Builder on the Edit File menu and press [Return].
The following screen appears.
Parameter
Window
Control
Window
Information
Window
Row/Column
Position of Cursor
Display
Window
Enter Text Here
2. Enter the following data for the Main Menu. Press [Return] after
entering each line:
1 Pump Application
2 Tank 1 Parameters
3 Batch Recipes
4 Alarm Demo
You have just created the Main Menu. It should look like this.
Continue to the next section to create the Sub-Menu.
Creating
Application Screens