Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 40)

Chapter 5
Creating a Sample Application
5–24
Data Entry (Screen 21)
1. Press the [F8] function key to start a new screen.
The screen prompts you for a new screen number.
2. Type 21 and press [Return].
The screen clears the previous screen and displays a list of screen types.
3. Highlight Data Entry Screen and press [Return].
4. Enter the following data for Data Entry Screen 21:
Type Enter Desired Temp and press [Return]
Type Actual: (5 spaces) Deg. C and press [Return]
Type Valid Range:140–170 and press [Return]
Type Desired: (4 spaces) and press [Return]
The screen should look like this.
Note: You will now enter 2 data registers for this screen.