Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 27)

Chapter 5
Creating a Sample Application
5–11
Data Display (Screen 22)
1. Press the [F8] function key to start a new screen.
The screen prompts you for a new screen number.
2. Type 22 and press [Return]. This is the number for the first Data Display.
The screen clears the Sub-Menu and displays a list of screen types:
3. Use the [
↓↑
] keys to highlight Data Display Screen and press [Return].
4. Enter the following data in the display window:
Type Tank Level and press [Return]
Enter 6 spaces, type Gallons, press [Return]
Enter 4 spaces, type % Full, press [Return]
Type Press Next
The screen should look like this.
Note: You will now enter data registers for this screen.