Creating a new application file, Starting dtam plus creating a new application file – Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL User Manual
Page 18
Advertising
Chapter 5
Creating a Sample Application
5–2
To run the DTAM Plus Programming Software:
5. Press any key to continue.
The Opening Menu displays.
Menu Window
Operation Window
Information Window
You are now ready to create a file for your application.
The first thing you need to do is create a file in which to store
your application.
1. Press [Return] to select Edit Program File from the Opening Menu.
The following screen appears.
Starting DTAM Plus
Creating a New
Application File
Advertising