Rockwell Automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL - Manual (Page 30)

Chapter 5
Creating a Sample Application
5–14
Data Display (Screen 23)
1. Press the [F8] function key to start a new screen.
The screen prompts you for a new screen number.
2. Type 23 and press [Return].
The screen clears the previous screen and displays a list of screen types.
3. Highlight Data Display Screen and press [Return].
4. Type ^^ Mixer Status ^^ and press [Return] in the Data Display.
The screen should look like this.
Note: You will now enter register data for this screen.