Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 16)

Publication 2711P-UM004B-EN-P - March 2007
16 Configure the Terminal as a Slave Device
Configure Communications After creating your Machine Edition application, you are ready to
configure communications using RSLinx Enterprise software.
1. Open RSView Studio software.
2. In the Application Explorer dialog, double-click RSLinx
Enterprise software to expand the tree.
3. Double-click Communication Setup.
4. If prompted, select Create a New Configuration and click Finish.
5. On the Local tab, right-click the 1789-A17 Backplane icon and
select Add Device.
This is the virtual backplane of the PanelView Plus or PanelView
Plus CE device.