Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 51)

Publication 2711P-UM004B-EN-P - March 2007
Configure the Terminal as a Scanner 51
3. Right-click the new 4-7 address block Bytes and select Add
Device to define the 1756-DNB DeviceNet module as the slave
device for the input address block.
4. In the Device Properties dialog for the input address block,
select the node of the slave device, in this example Node 1, and
click OK.
Node 1 indicates that the 1746-DNB module will operate as the
slave for the input data. The PanelView Plus will scan this data
from the module.
Create an Input Alias
To make connections to objects, aliases are required. You must create
an alias for the input address block.