Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE User Manual
Page 21
Advertising
Publication 2711P-UM004B-EN-P - March 2007
Configure the Terminal as a Slave Device 21
Create an Input Alias
To make connections to objects, aliases are required. You must create
an alias for the input address block. The aliases serve as the
connection reference you select in RSView Studio software.
1. Right-click the 0-3 Bytes icon and select Add Alias.
2. In the Alias Properties dialog, select these properties and click
OK to add the alias to the input address block:
• Alias Data Type = DINT
• Alias Name = Slave_Input
• Start Byte = 0
• Array Count = 1
Advertising