Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 22)

Publication 2711P-UM004B-EN-P - March 2007
22 Configure the Terminal as a Slave Device
The Array Count lets you quickly configure multiple aliases with
the same prefix.
Swapping of bytes or words is necessary for some controllers
such as SLC controller. Refer to Help for more information.
The slave input is now configured with:
• Address length of 4 bytes, starting at byte 0
• Slave device at node 2, which is the PanelView Plus terminal
• Alias of Slave_Input for the input address block