Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 30)

Publication 2711P-UM004B-EN-P - March 2007
30 Configure the Terminal as a Slave Device
1. Click Copy in Communication Setup.
The following dialog opens.
2. Click Yes.
The Communications Setup dialog will appear.
3. Click OK from the Communications Setup dialog to save the
configuration and close the dialog.
Create a runtime .mer file and download it to the PanelView
Plus terminal. Load the application in the terminal but do not
run the application. You must map the data between the
PanelView Plus terminal and the 1756-DNB scanner using
RSNetWorx for DeviceNet software.