Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 40)

Publication 2711P-UM004B-EN-P - March 2007
40 Configure the Terminal as a Slave Device
Map the PanelView Plus I/O to the 1756-DNB Scanlist
You can now add the PanelView Plus I/O data to the scanlist of the
1756-DNB DeviceNet module.
1. In the network dialog, double-click the 1756-DNB icon to access
the 1756-DNB properties.
2. Select the Module tab.
Because you are editing the configuration online, you are
prompted to:
• upload the current configuration in the module.
• download the configuration from the software.
3. Click Upload to edit the current configuration.