Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 33)

Publication 2711P-UM004B-EN-P - March 2007
Configure the Terminal as a Slave Device 33
When the network is scanned, the devices display in the
network dialog. The dialog shows an icon for both the
1756-DNB module and the PanelView Plus/PanelView Plus CE
DeviceNet.
Configure Slave I/O for the PanelView Plus Terminal
You must configure the slave I/O before adding it to the 1756-DNB
scanlist. This section shows how to configure slave I/O for the
PanelView Plus terminal.
PV Plus/PV Plus CE
DeviceNet