Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 29)

Publication 2711P-UM004B-EN-P - March 2007
Configure the Terminal as a Slave Device 29
The structure of the DeviceNet Output Table looks like this when
browsing for tags.
Copy RSLinx Configuration to the Target Tab
When the application is complete, you must copy the RSLinx
configuration from the Local tab to the Target tab before you compile
the .mer file.
The Target tab contains the configuration the PanelView Plus terminal
uses to run the application. For I/O network configurations such as
DeviceNet, the shortcut configurations should be the same. For other
protocols, it is not necessary to have identical configurations.