Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 63)

Publication 2711P-UM004B-EN-P - March 2007
Configure the Terminal as a Scanner 63
Map the I/O to the 1756-DNB Image Table
You must now map the I/O data to the image table of the 1756-DNB
module so that it can be scanned by the PanelView Plus terminal.
1. Select the Input tab to map the input data to the image table.
The input data just configured appears in the top window.
2. Select node 1, which represents the 1756-DNB slave mode I/O
and click AutoMap to map the data to the next least significant
DWord in the 1756-DNB input image table.