Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE User Manual
Page 41
Advertising
Publication 2711P-UM004B-EN-P - March 2007
Configure the Terminal as a Slave Device 41
When the upload is complete, the module tab will open.
4. From the Module tab, select Slot 2 which is the location of the
1756-DNB module in the ControlLogix rack.
5. Select the Scanlist tab to view and edit the 1756-DNB scanlist.
The PanelView Plus terminal appears as an available device.
This means you can add it to the scanlist.
Advertising