Rockwell Automation DeviceNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 66)

Publication 2711P-UM004B-EN-P - March 2007
66 Configure the Terminal as a Scanner
2. Select the Scanlist tab to view and edit the PanelView Plus
scanlist.
The 1756-DNB module appears as an available device. This
means you can add it to the Scanlist.
3. Select the 1756-DNB device and click > to add the device to the
Scanlist.
The Automap on Add checkbox is checked. When you add the
device to the Scanlist, the slave inputs and outputs are
automatically added to the input and output image tables.
TIP
If the Automap on Add checkbox was not checked, you
would need to manually map the data on the Input tab.