Interface module (ifm), Analog inputs and outputs – Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control User Manual
Page 141
Rockwell Automation Publication 7000A-UM200C-EN-P - June 2014
141
Component Definition and Maintenance
Chapter 3
Interface Module (IFM)
The Interface Module is used to make all customer useable connections to the
ACB. The pin numbers listed on the following pages refer to IFM pin numbers.
Figure 113 - Interface Module
Analog Inputs and Outputs
The PowerFlex 7000 offers one isolated process current loop transmitter and
three isolated process current loop receivers, embedded into the control. These
are accessible on the ACB.
The isolated Process Output is configured as 4...20 mA. The three isolated
process inputs are individually configurable for either a range of -10/0/+10V or
4...20 mA (Refer to Programming Manual).
The following information shows the connections for each input and output.
Even pin numbers
Odd pin numbers
Connection to ACB (J8)