Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control - Manual (Page 81)

Rockwell Automation Publication 7000A-UM200C-EN-P - June 2014 81
Component Definition and Maintenance Chapter 3
Figure 68 - Snubber Capacitor Replacement
Figure 69 - Removing Capacitor Bank from PowerCage
5. Remove the capacitor from the PowerCage.
6. Place the new capacitor back into the PowerCage.
Ensure the bottom lead of the capacitor is on the stud.
7. Slide the retaining rod into place and push the clips back into place.
8. Connect the top lead to the capacitor.
9. Install the PowerCage as outlined in PowerCage Removal on page 88 .
1. Detach leads of
resistor assembly
2. Pinch and remove
clips at end of retaining
rod
3. Extract
retaining rod
Push Nut
Retaining Rod
Capacitor Bank