Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control - Manual (Page 179)

Rockwell Automation Publication 7000A-UM200C-EN-P - June 2014 179
Appendix
D
Torque Requirements
Torque Requirements for
Threaded Fasteners Unless otherwise specified the following values of torque are to be used in
maintaining the equipment.
Table 11 - Torque Requirements
Diameter Pitch Material Torque (N•m) Torque (lb•ft)
M2.5 0.45 Steel 0,43 0.32
M4 0.70 Steel 1,8 1.3
M5 0.80 Steel 3,4 2.5
M6 1.00 Steel 6,0 4.4
M8 1.25 Steel 14 11
M10 1.50 Steel 29 21
M12 1.75 Steel 50 37
M14 2.00 Steel 81 60
¼ “ 20 Steel S.A.E. 5 12 9.0
3/8” 16 Steel S.A.E. 2 27 20