Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control - Manual (Page 79)

Rockwell Automation Publication 7000A-UM200C-EN-P - June 2014 79
Component Definition and Maintenance Chapter 3
Figure 65 - Snubber and Sharing Resistor Replacement
Figure 66 - Removing resistor bank from PowerCage
6. Remove the resistor bank from the Power Cage.
7. Place the new resistor bank assembly back into the PowerCage.
8. Slide the retaining rod into place and push the clips back into place.
1. Detach leads of
resistor assembly
2. Pinch and remove
clips at end of retaining
rod
3. Extract
retaining rod
Push Nut
Retaining Rod
Resistor Bank