Installation of exhaust air hood – Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control User Manual
Page 26
Advertising
26
Rockwell Automation Publication 7000A-UM200C-EN-P - June 2014
Chapter 2
Drive Installation
Figure 16 - Shock Indicator
Installation of Exhaust Air Hood
On the top of the cabinet with the cooling fan, a sheet metal exhaust hood is to
be installed. The components to make up the exhaust hood have been packaged
and shipped with the drive. For drives with an acoustic hood, the components are
shipped assembled. See
.
The first step is to remove the protective plate covering the fan opening on the
drive. It is a flat cover plate bolted to the top plate. Remove the bolts and plate
and set aside for re-use.
Secondly, loosely assemble the two L-shaped panel components shipped with the
drive as per
.
Advertising