Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control - Manual (Page 33)

Rockwell Automation Publication 7000A-UM200C-EN-P - June 2014 33
Drive Installation Chapter 2
Cabinet Layout and
Dimensional Drawings of
Drive The following dimension drawing is a sample and may not accurately detail your
drive. It is provided here to give you a general overview of a typical drive.
The Dimensional Drawings are order specific and will show the information
outlined.
The dimension drawing provides important information for the installation of
the equipment.
The FLOOR PLAN shows:
• the locations for anchoring the equipment to the floor (balloon D)
• size and location of openings for bottom power cable entry (balloons A
and B)
• size and location of openings for bottom control wiring entry (balloon C)
The ROOF PLAN shows:
• size and location of openings for top power cable entry (balloons A and B)
• size and location of openings for top control wiring entry (balloon C)
• minimum aisle clearance in front of equipment (balloon M)
The FRONT VIEW shows:
• minimum clearance required at top of drive for fan maintenance
(balloon K)