Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE User Manual
Page 19
Advertising
Publication 2711P-UM003B-EN-P - March 2007
Configure Unscheduled Communications 19
13. Select the ControlLogix processor type that the PanelView Plus /
PanelView Plus CE will communicate with and click OK. For this
example, select 1756-L63.
14. In the Device Properties dialog, set the Address of the processor
to 0, click Apply, and then OK. The address is the slot in which
the processor is physically located.
Advertising