Configure the panelview plus controlnet module – Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE User Manual
Page 25
Advertising
Publication 2711P-UM003B-EN-P - March 2007
Configure Scheduled Communications 25
Configure the PanelView Plus ControlNet Module
Configure the 1756-CNB/D module to add a ControlNet PanelView
Plus. This establishes a logical connection between the ControlLogix
processor and the PanelView Plus.
1. Right-click on 1756-CNB/D and select New Module.
2. Select 2711P-RN15S (or 2711P-RN15C) and then click OK.
Advertising