Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 41)

Publication 2711P-UM003B-EN-P - March 2007
Configure Scheduled Communications 41
4. When the download is complete, select the Connection Status
tab. It should look similar to this:
All of the ControlNet scanners have been successfully configured. The
final step to begin ControlNet Scheduled communications is to
configure the RSView Machine Edition project.
Configure the RSView
Machine Edition
Application Now that the ControlLogix processor and the ControlNet network are
configured, the last item to configure for ControlNet Scheduled
communications is the RSView Machine Edition application. Follow
the procedures in this section to configure an RSView Machine Edition
application.
PanelView Plus CE ControlNet - Scanlist Configuration
ATTENTION
ControlNet Scheduled Communications is not supported during
runtime for the desktop version of RSView Machine Edition.