Configure the controlnet scanner module – Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE User Manual
Page 24
Advertising
Publication 2711P-UM003B-EN-P - March 2007
24 Configure Scheduled Communications
Configure the ControlNet Scanner Module
Configure the 1756-CNB/D module.
1. Right-click on I/O Configuration and select New Module.
2. Select 1756-CNB/D and click OK.
3. In the Module Properties dialog, configure the 1756-CNB/D
ControlNet Scanner Module. Enter the name CNBR, select Node
1, select Slot 2, and then click Finish.
Advertising