Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 32)

Publication 2711P-UM003B-EN-P - March 2007
32 Configure Scheduled Communications
5. In the ControlNet Scanner Properties dialog, set the Node
Address to 2 and click OK.
– The node represents the unique node address (1-99) of the
ControlNet communication module.
– The slot corresponds to the position of the ControlNet
communication module in the virtual backplane of the
PanelView Plus / PanelView Plus CE, which is always 01.
6. Create a RSView Machine Edition .MER runtime file.