Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 56)

Publication 2711P-UM003B-EN-P - March 2007
56 Upgrade a 2711P-RN15S Module Firmware
6. From the Application menu, choose Create Runtime Application
to create an RSView Machine Edition runtime file.
7. Compile the project, download it to the terminal, and run the
project. If successful, the communication status LED’s illuminate
on the 2711P-RN15S module.
A sample .MER has been created to configure the 2711P-RN15S
as Node 2 on a ControlNet network. This application is located
on Technote A103053983 on the Rockwell Automation Technical
Support Knowledgebase at
http://support.rockwellautomation.com. Download and run
ControlNet Configuration.mer on the PanelView Plus or
PanelView Plus CE.