Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 50)

Publication 2711P-UM003B-EN-P - March 2007
50 Configure Scheduled Communications
The I/O configuration should look like the following:
Create a Shortcut to the Communication Setup
Create a shortcut in both the Local and Target tabs to reference this
communication setup for the HMI display.
1. On the Local tab, select the 2711P-RN15x ControlNet
communication module and select Add.
2. Enter the shortcut name CNET_SCHEDULED and click OK.
The screen looks similar to this.