Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 53)

53 Publication 2711P-UM003B-EN-P - March 2007
Chapter
4
Upgrade a 2711P-RN15S Module Firmware
Objectives This chapter shows how to upgrade the firmware for a 2711P-RN15S
Series A, Rev. A ControlNet Communications Module to Rev. C for
Scheduled messaging. This also applies to terminals pre-configured
and shipped from the factory with a ControlNet Module. During the
upgrade, the module firmware is updated from v2.7 to v3.8 or later.
The firmware upgrade is available at the Rockwell Automation
Technical Support website under Firmware Updates and RSView ME.
All 2711P-RN15C ControlNet communication modules for PanelView
Plus 400 and 600 support ControlNet Scheduled Messaging.
PanelView Plus CE (FUW utility)