Rockwell Automation 2711P ControlNet Communications for PanelView Plus and PanelView Plus CE - Manual (Page 26)

Publication 2711P-UM003B-EN-P - March 2007
26 Configure Scheduled Communications
3. In the Module Properties dialog, configure the 2711P-RN15S (or
2711P-RN15C) PanelView Plus module. Enter the name PVP,
select Node 2, Revision 7, and then click Finish.
Configure the Controller Tags
Configure these Controller tags as consumer and producer:
• Input_From_PVP = consumed tag type
• Output-From_PVP = produced tag type
Configure the Consumer Tag
1. Right-click on the Input_From_PVP tag and select Edit Tag
Properties.