Metrohm 900 Touch Control Manual User Manual

900 touch control

Advertising

900 Touch Control

Manual

8.900.8015EN / 2014-03-10

Advertising

Table of contents

Document Outline

Table of contents
Table of figures
1 Introduction
- 1.1 Instrument description
- 1.2 Titration and measuring modes
- 1.3 About the documentation
  - 1.3.1 Symbols and conventions
2 Safety instructions
- 2.1 General notes on safety
- 2.2 Electrical safety
- 2.3 Tubing and capillary connections
- 2.4 Flammable solvents and chemicals
- 2.5 Recycling and disposal
3 Overview of the instrument
4 Installation
- 4.1 Setting up the instrument
5 Titrations
- 5.1 Dynamic equivalence point titration (DET)
- 5.2 Monotonic equivalence point titration (MET)
- 5.3 Endpoint titration (SET)
- 5.4 Water determination according to Karl Fischer (KFT)
- 5.5 Endpoint titration with constant maintenance of the measured value (STAT)
6 Operation
- 6.1 Switching the instrument on and off
- 6.2 Fundamentals of operation
7 System settings
- 7.1 General system settings
  - 7.1.1 Selecting the dialog language
  - 7.1.2 Setting the date, time and local time
- 7.2 System-specific dialog options
- 7.3 User administration
- 7.4 Measured value display
- 7.5 Acoustic signals
8 Titrants
- 8.1 Adding a new titrant
- 8.2 Editing titrant data
- 8.3 Monitoring the working life
- 8.4 Dosing unit
- 8.5 Exchange unit
  - 8.5.1 Parameters for the preparation (PREP)
  - 8.5.2 Tubing parameters
- 8.6 GLP test for exchange unit and dosing unit
- 8.7 Titer determination options and data
  - 8.7.1 Titer validity
  - 8.7.2 Properties of the previous titer determinations
9 Reagents
- 9.1 Editing reagent data
- 9.2 Reagent monitoring
10 Sensors
- 10.1 Adding a new sensor
- 10.2 Editing the sensor data
- 10.3 Monitoring the working life
- 10.4 Calibration data (for pH- and ISE electrodes and conductivity measuring cells only)
  - 10.4.1 Properties of the previous calibrations
- 10.5 Limit values for the calibration data
- 10.6 Monitoring the calibration interval (only for pH and ion-selective electrodes and conductivity measuring cells)
11 Device manager
- 11.1 Adding a new device
- 11.2 Configuring the instrument
- 11.3 Touch Control
- 11.4 Metrohm control devices
- 11.5 USB Sample Processor
- 11.6 Sample racks
  - 11.6.1 Editing rack data
  - 11.6.2 Rack adjustment
- 11.7 Printer
- 11.8 Balance
- 11.9 USB/RS-232 adapter
- 11.10 PC keyboard
- 11.11 Barcode reader
12 File manager
- 12.1 Managing files
- 12.2 External storage medium
- 12.3 Creating backups / Restoring data
  - 12.3.1 Restoring data
13 GLP manager
- 13.1 Automatic system test
- 13.2 Test tools
- 13.3 GLP tests for measurement and titration
  - 13.3.1 Parameter description
- 13.4 System validation
  - 13.4.1 Parameter description
- 13.5 System monitoring
  - 13.5.1 Service interval
  - 13.5.2 Backup interval
14 Common variables
- 14.1 Editing common variables
- 14.2 Properties of common variables
- 14.3 Monitoring validity
- 14.4 Assigning a result automatically to a common variable
15 Templates
- 15.1 Sample data
  - 15.1.1 Sample identification list
  - 15.1.2 Sample assignment table
- 15.2 Custom result templates
  - 15.2.1 Editing result templates
- 15.3 Input lines
  - 15.3.1 Editing the input signal
- 15.4 Output lines
  - 15.4.1 Editing the output signal
- 15.5 Custom calibration buffers
  - 15.5.1 Defining calibration buffers
- 15.6 Report header
- 15.7 Custom electrode type
  - 15.7.1 Limit values for the electrode rating
16 Methods
- 16.1 Creating a new method
- 16.2 Saving a method
- 16.3 Loading a method
- 16.4 Editing a method
  - 16.4.1 Inserting a command
- 16.5 Method options
17 Electronic signatures
- 17.1 Signing methods/determinations electronically
- 17.2 Deleting electronic signatures
18 Control
19 Favorites
- 19.1 Creating favorites
  - 19.1.1 Editing favorites
20 Sample data
- 20.1 Entering sample data in the main dialog
- 20.2 Requesting sample data at the start of the determination
21 Sample table
- 21.1 General
- 21.2 Edit the sample data
- 21.3 Properties
22 Determination run
- 22.1 Carrying out a single determination
- 22.2 Performing a sample series
- 22.3 Canceling determinations manually
23 Live modifications
- 23.1 Editing the sample data of the running determination
- 23.2 Editing the sample table while a determination is running
- 23.3 Live display
- 23.4 Live parameters
24 Results and more determination data
- 24.1 More determination data
  - 24.1.1 Details
- 24.2 Messages
- 24.3 Local common variables
- 24.4 Determination properties
- 24.5 Loading a determination
  - 24.5.1 Determination list
- 24.6 Saving a determination
- 24.7 Curves
- 24.8 Recalculation and reevaluation
25 Statistics
- 25.1 Displaying details for a result
- 25.2 Deleting statistical data
- 25.3 Adding a determination to a determination series
26 Result table
- 26.1 Properties
- 26.2 Saving the result table
- 26.3 Loading the result table
27 Printing
- 27.1 General report options
- 27.2 Settings of the individual reports
- 27.3 List of all printable reports
28 Manual control
- 28.1 Opening and closing the manual control
- 28.2 Measuring
  - 28.2.1 Parameter description
- 28.3 Dosing
- 28.4 Stirring
- 28.5 Conditioning a titration cell
  - 28.5.1 Parameter description
- 28.6 Remote
- 28.7 USB Sample Processor
29 Parameters
- 29.1 Dynamic equivalence point titrations (DET)
- 29.2 Monotonic equivalence point titrations (MET)
- 29.3 Endpoint titrations (SET)
- 29.4 Volumetric Karl Fischer titrations (KFT)
- 29.5 Coulometric Karl Fischer titrations (KFC)
- 29.6 Bromine index determination (BRC)
- 29.7 STAT titrations (STAT)
- 29.8 Manual titrations (MAT)
- 29.9 Measurements (MEAS)
- 29.10 Calibration of sensors (CAL)
- 29.11 Electrode test for pH electrodes (ELT)
- 29.12 Evaluations (EVAL)
- 29.13 Calculations
- 29.14 Reports (REPORT)
- 29.15 Dosing and Liquid Handling
- 29.16 Communication
- 29.17 Automation
- 29.18 Miscellaneous commands
30 Operation and maintenance
- 30.1 System initialization
- 30.2 Quality management and qualification with Metrohm
31 Troubleshooting
- 31.1 Editing methods
- 31.2 Sample table
- 31.3 Results/Statistics
- 31.4 Printing
- 31.5 Manual control
- 31.6 Miscellaneous
- 31.7 SET titration
- 31.8 Karl Fischer titration
- 31.9 STAT titration
32 Appendix
- 32.1 Dosing unit
  - 32.1.1 Maximum dosing and filling rate
  - 32.1.2 Default parameters for preparing (PREP) and emptying (EMPTY)
- 32.2 Exchange unit
  - 32.2.1 Maximum dosing and filling rate
  - 32.2.2 Default parameters for preparing (PREP)
- 32.3 Stirring rate
- 32.4 Balance
- 32.5 Result variables as parameter setting
- 32.6 Electrode calibration with USB Sample Processors
- 32.7 Stored buffer series for pH calibration
- 32.8 Using AuditTrailViewer
- 32.9 Diagnosis
- 32.10 Arithmetic algorithms in the Titrando
33 Technical specifications
- 33.1 Touch screen
- 33.2 Interfaces
- 33.3 Power supply
- 33.4 Safety specifications
- 33.5 Electromagnetic compatibility (EMC)
- 33.6 Ambient temperature
- 33.7 Dimensions
34 Warranty (guarantee)
35 Accessories
Index

Popular Brands

Popular manuals