Metrohm 900 Touch Control Manual - Manual (Page 42)

7.2 System-specific dialog options
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
26 ￭￭￭￭￭￭￭￭
900 Touch Control
Blocking commands
Proceed as follows to block unneeded commands:
1 Display the command list
Tap on the button [Command list].
The list of all command groups is displayed.
2 Deactivate command groups
Deactivate those command groups which are not permitted to be
used.
3 Save the settings
Tap on the fixed keys [ ] or [ ].
All deactivated commands appear grayed out in the method editor
and cannot be used for creating methods.
Blocking fixed keys
Proceed as follows to block unneeded fixed keys:
1 Display fixed keys which can be blocked
Tap on the button [Fixed keys].
All fixed keys which can be blocked are displayed.
2 Deactivate fixed keys
Deactivate those fixed keys which are not permitted to be used.
3 Save the settings
Tap on the fixed keys [ ] or [ ].
Deactivated fixed keys cannot be used.
Configuring the routine dialog
A suitable Standard configuration has already been saved for routine
operations.
￭ Methods can only be loaded, but not modified or created.
￭ Determinations cannot be recalculated.
You can readjust this standard configuration by disabling additional func-
tions or re-enabling disabled functions.