Metrohm 900 Touch Control Manual - Manual (Page 126)

11.7 Printer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
110 ￭￭￭￭￭￭￭￭
900 Touch Control
Shared memory
The report will be saved in a shared directory on the network. The
shared directory is selected in the Edit device / Shared memory dia-
log (see Chapter 11.3.3, page 84).
Copy or extract content allowed
on | off (Default value: on)
If this option is activated, then content can be copied or deleted from the
PDF file.
Printing allowed
on | off (Default value: on)
If this option is activated, then the PDF file can be printed.
Change the document allowed
on | off (Default value: off)
If this option is activated, then the PDF file can be edited.
Add or change comments allowed
on | off (Default value: on)
If this option is activated, then comments can be added to the PDF file.
11.7.2 Network printer
Printer: Edit ▶ Network printer
If you have connected your Touch Control to your network, then you can
specify a network printer for your reports in this dialog.
NOTE
If you have shared a memory location on a PC within your network and
if you have configured the Touch Control accordingly (see Chapter
11.3.3, page 84), then the settings for the parameters Domain, User
and Password will be applied and can then no longer be modified in
this dialog.
CAUTION
If the computer on which the network printer is configured does not
have the same subnet mask as the Touch Control, then a WINS server
must be present. The computer must be entered in this server.