Metrohm 900 Touch Control Manual - Manual (Page 265)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 Manual control
900 Touch Control
￭￭￭￭￭￭￭￭ 249
[Remote]
Scanning the input lines on the remote interface and setting the output
lines (see Chapter 28.6, page 265).
[Sample Processor]
Controlling the USB Sample Processor manually (see Chapter 28.7, page
266).
28.1 Opening and closing the manual control
Opening the manual control
1 Open the dialog window
￭ Tap on the fixed key [ ].
Manual control opens:
2 Select the function
￭ Tap on the button for the desired function.
If the function can be carried out by several devices, a dialog to
select the device will appear first; otherwise the dialog for the
selected function will appear immediately.
Closing the manual control
1
￭ Tap on the fixed key [ ].