Metrohm 900 Touch Control Manual User Manual
Page 129
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Device manager
900 Touch Control
￭￭￭￭￭￭￭￭
113
Device name
Here you can enter a device name of your choice.
Entry
24 characters maximum
Comment
Entry
24 characters maximum
Balance type
If you have connected a balance, then you have to specify the balance
type here.
Selection
AND | Mettler | Mettler AT | Mettler AX |
Ohaus | Precisa | Sartorius | Shimadzu
Default value
Sartorius
RS-232
RS-232 interface to which the balance is connected. The interface param-
eters are adjusted in the Edit device / Port parameters dialog (see
Chapter 11.9, page 114).
Selection
COM 1 | COM 2
Default value
COM 1
COM 2
The interface is disabled.
The following table indicates the balance type that needs to be selected
for the balance model:
Balance
Balance type
AND
AND
Mettler AB, AE, AG, AM,
AJ, PE, PM, PJ, PR, XP, XS
Mettler
Mettler AT
Mettler AT
Mettler AX, MX, UMX, PG,
AB-S, PB-S
Mettler AX
Ohaus Voyager, Explorer,
Analytical Plus
Ohaus
Precisa
Precisa
Sartorius
Sartorius
Shimadzu BX, BW
Shimadzu