Metrohm 900 Touch Control Manual - Manual (Page 241)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
24 Results and more determination data
900 Touch Control
￭￭￭￭￭￭￭￭ 225
24.6 Saving a determination
Results dialog: More data ▶ Load/ Save ▶ Save
Determinations can be saved as follows:
￭ Manually in this dialog.
The suggested default setting for file names is the first 16 characters of
Identification 1, followed by the determination time in the format
YYYYMMDD-hhmmss. Extending the file name with the determination
time has the advantage that the file names of all determinations are
unique.
￭ Automatically at the end of the determination (see Chapter 16.5.6,
page 180).
The following data is stored for each determination:
￭ Calculated results
￭ Measuring point lists, equivalence points, curves and variables which
were generated during the determination
￭ Determination properties
￭ Statistics (if carried out)
￭ Method with which the determination was carried out
￭ Common variables (values and properties of all common variables at
the time of the determination)
￭ Titrant data of the titrant used
￭ Calibration data of the sensor used
24.7 Curves
Results dialog: Curve
The curve of the current determination is displayed in the Results / Curve
dialog. You can configure the curve display.