Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 107)

Chapter 6. Data Formatting and Reports
99
Figure 76. Raw Data Report.
For absorbance readings, the Raw Data Report will contain the absorbance value of
each well in the microplate. The values are reported in ODs.
If you elected to ratio the results of a dual wavelength reading in the Protocol (see
page 26), the measurement wavelength reading is divided by the reference
wavelength reading, and the resulting raw data will be displayed as simple ratios with
no units.
A missing or out-of-range value is indicated by three asterisks (***).
Absorbance Report
This report is available for Endpoint and Multiple Plate Protocol data.
Figure 77. Absorbance Report.