Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 30)

Microplate Manager User Guide
22
If no reader is found, you will receive a warning message. Make sure the reader is
turned on, and check all the connections to the reader. See the microplate reader
hardware manual for more details.
Creating/Opening a Protocol
Creating a New Protocol
To create a new Protocol, select New Kinetic Protocol, New Endpoint Protocol, or
New Multiple Plate Protocol from the FILE menu. This will open the dialog box for
that particular type of Protocol.
Opening an Existing Protocol
To edit an existing Protocol File, choose Open... from the FILE menu, and then
select the Protocol name from the Open File dialog box. File names for Protocols
have the suffixes .epr (Endpoint reading), .mpr (Multiple Plate reading), or .kpr
(Kinetic plate reading).
Only one Protocol may be open at a time.