Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 40)

Microplate Manager User Guide
32
Figure 22. Reports dialog box for Endpoint and Multiple Plate Protocols.
At least one non-custom report must be selected to display after a reading. For
Endpoint and Multiple Plate Protocols, the Raw Data Report is the default report to
be displayed. For Kinetic Protocols, the Kinetic Plots Report is the default report.
You can select one or more reports using the checkboxes.
If you select the Custom Excel Report option, after the Protocol reading Microsoft ®
Excel will automatically open and the report will be displayed in the Excel window.
When automatically printing reports, to select print options such as page orientation
and paper source, select Print Setup... from the FILE menu. This will open a Print
Setup dialog box.
Reports that are not selected in advance in the Protocol File may be generated,
displayed, and printed after a reading from the Data File.
Labels
From within the Reports dialog box, you can create custom labels to be printed at the
top of each report. If you create a label in a Protocol, after the plate has been read
and before the reports have been generated, you will be prompted for the labeling
information if it has not already been entered.