Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 47)

Chapter 4. Protocols
39
Figure 29. Features of a Kinetic Protocol dialog box.
The controls common to all Protocols are described on page 23. The controls specific
to Kinetic Protocols are described below.
Reading Sets
A reading set consists of the number of times a plate is read, the delay between each
reading, and (if desired) the mixing time before each reading. You can specify up to
five reading sets per Protocol.
To activate a reading set, click on the checkbox next to the set number. Only sets that
are checked will be run.
Reading sets Analysis options