Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 78)

Microplate Manager User Guide
70
desired replicate group from the pulldown list of existing replicate groups within the
dialog box.
Entering Standard Concentrations
If you have identified standard wells on your template (see page 65), you can enter
the concentrations for those standards.
Select Edit Standard Conc from the EDIT menu. This will open the Edit Standards
dialog box.
Figure 52. Edit Standards dialog box.
Each defined assay with standards will have a tab that is labeled with the name of the
assay (default names are Assay 1, Assay 2, etc.). Concentrations for each assay are
entered separately on a form under each tab. To enter concentrations for Assay 2,
click on the Assay 2 tab.
Each standard is listed in the column at the left. The default concentration is 1.