Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 74)

Microplate Manager User Guide
66
unknown or standard shares the same number, they are part of the same replicate
group (see page 68).
Clicking on several unknown or standard wells in succession will number them
sequentially.
You can also number your wells sequentially using the Autofill buttons. Click on
Autofill Left to Right and drag across multiple rows and columns of wells with your
Standard or Unknown pointer. The wells will be numbered sequentially from left to
right, then top to bottom.
Figure 49. Autofilling a row of standards, left to right.
Click on Autofill Top to Bottom and drag across multiple rows and columns of wells,
and the wells will be numbered sequentially from top to bottom, then left to right.
Standards and unknowns are numbered sequentially within each assay. If you have
defined more than one assay on your template, each will have its own Unknown 1, 2,
3, etc. You cannot define well types across assays.
Changing Well Types and Numbering
To change the type of a well or group of wells, select the appropriate well type tool
and overwrite them, as if you were defining the wells for the first time.
Autofill Left to
Right selected