Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 73)

Chapter 5. Templates
65
Defining Standards and Unknowns
After you have defined the assays in the template, you are ready to identify the wells
containing standards and unknowns on your template. Identifying the well types tells
Microplate Manager how to use the well data from a reading in the resulting reports.
You should define any assays before specifying well types.
To format wells containing standards, click on the Format as Standards button, then
click or drag on the standard wells in the template.
To format wells containing unknowns, click on the Format as Unknowns button, then
click or drag on the unknown wells in the template.
To change a formatted well back to undefined, click on the Format as Undefined
button, then click or drag on the defined wells.
Figure 48. Defining standard wells on a template.
Numbering Unknowns and Standards
Unknowns are indicated in the template by a square with a number at the center.
Standards are indicated by a circle with a number at the center. If more than one